Bathroom furniture simple fit system

1)We drill out and for all the handles (we fit them inside the unit for safe transportation.) 2)We cut the basin fascia ready to accept the basin. 3)We cut the worktop ready to accept the basin. 4)We cut the worktop to the correct width for your furniture. We cannot cut the depth of the worktop due to the majority of wall being out of square and therefore the worktop depth needs to be cut on site to allow for this. 5)We edge the worktop. 6)We cut and edge the plinths. 7)We cut the bottom WC unit panel ready for the plumbing pipes to meet the WC. 8)We cut the hole out for the push button on the toilet.

Included in the price of your bathroom.

We can only offer this service for furniture runs up to 2000mm and only if the toilet, basin and cistern is ordered from us as we cannot test the cutouts without having the basin or toilet with us. We do not trust templates as they are sometimes wrong. We can only cut out laminate (not Ionstone) worktops at present.

The depth of the worktop due to the majority of wall being out of square and therefore the worktop depth needs to be cut on site to allow for this.